EVAP emission control system (gross leak). Leak detected. 

 

 

Trouble code P0455 indicates a large leak in the evaporative emission control system (also known as EVAP). This system reduces air pollution by preventing fuel vapors in the gas tank from escaping into the atmosphere. It traps vapors in a charcoal canister until the engine can burn them.  

 

The engine control unit (ECU) performs periodic tests to ensure the EVAP system works properly. If the ECU detects a leak, it triggers a trouble code and turns on the check engine light. 

 

This code usually indicates a minor problem, such as a loose gas cap, damaged vapor lines, a faulty canister purge valve, or a crack in the fuel tank. 

 

Diagnostic trouble code P0455 often appears with other EVAP-related codes. These may include P0440 (EVAP system malfunction), P0441 (improper purge flow), or P0442 (EVAP system small leak detected), P0457 (loose gas cap). Examining all the codes as a whole can help pinpoint the problem.  

 

 

Trouble code P0455 is not critical and won't immediately affect your vehicle's performance. However, it can increase air pollution by releasing fuel vapors into the atmosphere. Luckily, fixing it is relatively inexpensive. 

 

 

Yes, you can still drive with a P0455 fault code, but it's wise to address the issue soon. An EVAP leak won't cause immediate damage, but it can lead to other problems if unfixed, such as the check engine light staying on and masking new engine issues.  

 

In addition, fuel vapors are not only harmful to the environment but also to your health. Prolonged exposure to these vapors can cause headaches, breathing difficulties, and other health problems. 

 

 

If your car has a P0455 code, you may not notice any changes in vehicle performance, but some symptoms may appear. Aside from the check engine light, the most common sign is a fuel smell near the gas cap or inside your car. 

 

 

Several issues can cause the P0455 code. The most common is a loose or broken fuel cap. When the cap doesn't seal properly, fuel vapors can escape and trigger the code. 

 

Another common issue arises from cracked or damaged EVAP hoses carrying fuel vapors to the charcoal canister. 

 

A faulty EVAP canister purge valve or canister vent valve (also known as vent solenoid) can also lead to this code.  

 

The fuel tank itself may have a crack or damage. This is less common but can happen due to wear and tear or minor accidents. 

 

Finally, a malfunctioning leak detection pump can be the culprit. This pump helps the ECU detect leaks in the EVAP system. If it fails, it may incorrectly indicate a leak and trigger the P0455 code.  

 

 

Use these tips to diagnose and fix a P0455 code accurately: 

 

 

Use a code reader to check for other related trouble codes. These may provide additional clues to the underlying problem. Other common diagnostic trouble codes to look for include:

 

 

 

 

Use the OBD2 reader to clear the trouble codes. Then drive your car for a day.

 

After the drive, scan the car to see if the same problem reappears. If not, it might've just been a one-time occurrence. But if the issue is here again, it means there's a real problem that needs further action. 

 

 

Make sure the gas cap is tight and undamaged. Check the condition of the rubber O-ring and replace it if necessary. A loose or damaged gas cap is the most common cause of code P0455.

 

 

A smoke test can help locate EVAP leaks by filling the system with smoke and observing where it exits. This method is very effective for leaks.

 

 

Check for cracks, holes, or disconnected hoses. Replace any damaged ones.

 

 

Inspect the fuel tank for signs of damage or leaks. If necessary, repair or replace the tank. A cracked fuel tank can leak fuel vapor and cause fire. 

 

 

Ensure that the EVAP leak detection pump is working properly. If it's defective, it might incorrectly detect a leak. Replace the pump if necessary so you can detect leaks accurately.

 

 

 

Fixing a P0455 code is relatively inexpensive, from just a few dollars for a new gas cap. In rarer cases, repairs can cost up to a few hundred dollars. 

 

 

A defective or loose gas cap can prevent the EVAP system from sealing properly. This allows fuel vapors to escape, triggering a P0455 code. It's one of the easiest things to fix.

 

The gas cap is a key component of the EVAP system. It must create a tight seal to keep fuel vapors contained. A damaged or improperly seated gas cap will disrupt this seal. 

 

 

Ignoring the P0455 code can result in a failed vehicle inspection and fines.

 

Over time, a small EVAP leak can become larger. This can cause a stronger fuel smell outside and inside the car.